PRODUCTS
AM65x Industrial SoM
The AM65x Industrial SOM is an easy to use, compact, light-weight System on Module providing very high processing power for Industrial applications.
- Quad Cortex A53 processor with Dual-core ARM Cortex-R5F
- Supports up to 4GB DDR4 with 1GB ECCÂ and 32GB eMMC
- Linux, Helix Hypervisor, VxWorks and Android Support
- Multi-protocol support: ModBus, CANopen, ProfiNET, ProfiBUS, Ethernet/IP, EtherCAT, EnDAT/EQEP, CCLink IEField, cycle-by-cycle PWM control
- One Gigabit Ethernet PHY (CPSW)
- 6 x Gigabit Ethernet Ports (PRU_ICSSG)
- On-board power regulators and Reset circuitry
- Form Factor: 63 x 90mm
- Supports CAN, USB, SPI, UART, I2C and GPIOs Interface
- Time-Sensitive Networking (TSN) support
mmWave Radar Technology
Based on Texas Instruments' AWR and IWR mmWave Radar sensors, Mistral's mmWave Radar modules are compact, light-weight RADARs providing superior functionalities for Industrial, Robotics, Healthcare, and Automotive applications.Â
- FMCW Transceiver with Integrated PLL, Transmitter, Receiver, Baseband and ADC
- 60-64GHz and 76-81GHz Coverage with 4GHz Continuous Bandwidth
- Four Receive Channels and Three Transmit Channels
- Built-in Calibration and Self-test
- ARM® Cortex® R4F-Based Radio Control System
- Hardware Accelerator for Signal Processing (FFT, Filtering and CFAR Processing)
- C674x DSP for FMCW and Advanced Signal Processing
- Supports TI SDK 3.03 (60GHz Aop and 77GHz AoPCB) and SDK 3.02 (60GHz AoPCB)
- Sensor Fusion Kit supports CSI2 Camera
- Fixed and floating-point TMS320C66x digital signal processor (DSP) generation cores
- Vision AccelerationPac (EVE)
- Dual-Cortex-M4 processors
AM437x PoM
The AM437x POM is a low cost, small footprint, high performance; easy-to-use Product on Module
built around the powerful 800MHz/1GHz Sitara AM437x SoC from Texas Instruments.
- 800MHz/1GHz ARM Cortex-A9 processor with multi core PRU-ICSS
- WiFi + BT module with Antenna
- 1 GB DDR3L Memory with Micro SD Card Slot
- HDMI output support
- USB & DC powered
- PMIC to power processor, memory and other peripherals
- Dimension: 125mm X 85mm
- Expansion headers:Â LCD, CAM, Ethernet, CAN, I2C, SPI, ADC, PWM, McASP, MMC etc.
- USB 2.0 OTG and Host
- 2 x Gigabit Ethernet
- Audio In/Out
RTM-Break-out Card
The Rear-transition Module – Breakout Card (RTM-BOC) is an eight layer plug-in module for the Keystone II family of Edison, Hawking and Kepler EVMs
showcasing the multi-core DSP+ARM KeyStone II System-on-Chips from Texas Instruments.
- Eight-layer PCB with IT168 dielectric material for high speed data support
- Fully Open Source Linux Board Support Package
- Two port (Each port of 4 lanes) Hyperlink interface
- Four lane 2 Generation Antenna interface (AIF2)
- XFI interface
- Quad port PHY
- 10/100/1000 Mbps data rate support
- Two dual port RJ45 connectors with integrated magnetics and LEDs
- Two Hard Metric ZD type μTCA connectors
- Power from onboard +12V DC jack or power from EVM board through μTCA connector.
SERVICES
We offer a wide array of product design, custom hardware design
and software development services on TIs ARM SitaraTM, Media Processors
mmWave RADAR Chipsets, and DSP platforms.
- Product Design Services
- Hardware Design Services
- Firmware and BSP
- Audio & Video
- Test & Validation
- Production Support
APPLICATIONS
Wearable Electronics
Medical Electronics
Industrial Gateways
Home Automation
Assistive Devices
ePOS
Biometrics
ADAS
RESOURCES
Related Product
77GHz AoPCB Automotive RoM
Related Product
AM65x Industrial SOM
Related Product
60GHz ES2.0 AoP Module
Related Product
60GHz ES2.0 AoPCB Module
Related Product
AM437x PoM
Related Product
Sensor Fusion Kit
Blog
ARM Technologies and its significance in Embedded Domain
Related Topic
Product Design Services
Application Note
Digital Signage Solution using TMDXEVM8148
Case Study
Modular Industrial Gateway
Technical Article
Vital Sign Monitoring using mmWave Radar
Webinar
mmWave Technology Webinar
Application Note
Industrial Robotics Control Unit
